Jump to content

Error a la hora de quemar....

Cherlas

By Cherlas
in Soporte Técnico

 Share

Recommended Posts

Cherlas Newbie

Cherlas

Posted
Posted (edited)

resulta que a la hora de empezar quemar datos en un DVD con el nero me ha dado este error varias veces "PMA update failure" (4 veces seguidas para ser exacto :() lo que significa 4 DVDs a la ###### :angry::cwy:, ayer tambien intente quemar una imagen ke tenia en el HD y tambien me dio el mismo error.. :(, lo raro es ke aveces si bretea bien el ####### quemador, los DVDs son marca RIDATA y el quemador es un LG.

alguien sabe cual puede ser el motivo, razon o circunstancia??? sera el nero o el DVD o el quemador???? :huh:

gracias!

[EDIT] este es el log

Windows XP 5.1

IA32

WinAspi: -

ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 05:35:34 p.m.

Nero version: 6.6.0.3

Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A104 - HA 1 TA 0 - 6.6.0.3

Adapter driver: <IdeChnDr> HA 1

Drive buffer : 2048kB

Bus Type : default (0) -> ATAPI, detected: ATAPI

CD-ROM: <HL-DT-ST DVDRAM GSA-4120B>Version: A104 - HA 1 TA 0 - 6.6.0.3

Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===

DiskPeripheral : ST380011A IdeChnDr Port 0 ID 0 DMA: On

DiskPeripheral : Maxtor 6Y120L0 IdeChnDr Port 0 ID 1 DMA: Off

CdRomPeripheral : HL-DT-ST DVDRAM GSA-4120B IdeChnDr Port 1 ID 0 DMA: On

DiskPeripheral : WDC WD400EB-11CPF0 IdeChnDr Port 1 ID 1 DMA: Off

CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===

HL-DT-ST DVDRAM GSA-4120 F: CDRom0

Generic DVD-ROM H: CDRom1

AXV CD/DVD-ROM I: CDRom2

=======================

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 639MB (654640kB)

Free physical memory: 206MB (211648kB)

Memory in use : 67 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

27.6.2005

ISO compilation

04:30:16 p.m. #1 Text 0 File Isodoc.cpp, Line 6168

Iso document burn settings

------------------------------------------

Determine maximum speed : FALSE

Simulate : FALSE

Write : TRUE

Finalize CD : TRUE

Multisession : FALSE

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

04:30:16 p.m. #2 Text 0 File Reader.cpp, Line 127

Reader running

04:30:16 p.m. #3 Text 0 File Writer.cpp, Line 122

Writer HL-DT-ST DVDRAM GSA-4120B running

04:30:16 p.m. #4 ISO9660GEN -11 File geniso.cpp, Line 3286

First writeable address = 0 (0x00000000)

04:30:16 p.m. #5 Text 0 File Burncd.cpp, Line 3151

Turn on Disc-at-once, using DVD media

04:30:17 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 256

Last possible write address on media: 2298495 (510:46.45, 4489MB)

Last address to be written: 1165273 (258:56.73, 2275MB)

04:30:17 p.m. #7 Text 0 File DlgWaitCD.cpp, Line 268

Write in overburning mode: NO (enabled: CD)

04:30:17 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 2309

Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD-R

Disc Manufacturer: RITEKG - 04

Disc Application Code: 64, Disc Physical Code: 193

04:30:17 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 430

>>> Protocol of DlgWaitCD activities: <<<

=========================================

04:30:17 p.m. #10 Text 0 File ThreadedTransferInterface.cpp, Line 830

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 1165424 (1165424) = #1165424/258:58.74

relocatable, disc pos for caching/writing not required/ required, no patch infos

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1165424 blocks [HL-DT-ST DVDRAM GSA-4120B]

--------------------------------------------------------------

04:30:17 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040

Prepare recorder [HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2386788352, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0x00

0 | 1 | 0 | 0x41 | 0x00

0 | 1 | 1 | 0x41 | 0x00

1165424 | lead-out | 1 | 0x41 | 0x00

04:30:17 p.m. #12 Phase 24 File dlgbrnst.cpp, Line 1832

Caching of files started

04:30:17 p.m. #13 Text 0 File Burncd.cpp, Line 4038

Cache writing successful.

04:30:17 p.m. #14 Phase 25 File dlgbrnst.cpp, Line 1832

Caching of files completed

04:30:17 p.m. #15 Phase 36 File dlgbrnst.cpp, Line 1832

Burn process started at 4x (5.540 KB/s)

04:30:17 p.m. #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

04:30:17 p.m. #17 Text 0 File DVDR.cpp, Line 2248

Recording mode: Sequential Recording Mode

04:30:17 p.m. #18 Text 0 File Mmc.cpp, Line 21025

Set BUFE: Buffer underrun protection -> ON

04:30:17 p.m. #19 Text 0 File DVDR.cpp, Line 2389

Start write address at LBA 0

DVD high compatibility mode: Yes

04:30:17 p.m. #20 Text 0 File Cdrdrv.cpp, Line 8315

---- DVD Structure: Physical Format Information (00h) ----

Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD-R (2), Part Version: 5

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable

Linear Density: 0,267 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: 26127F h

End Sector Number in Layer 0: 0 h

Data in Burst Cutting Area (BCA) does not exist

Start sector number of the current Border-Out: 2FE10 h

Start sector number of the next Border-In: 2FFA0 h

Media Specific [16..63]:

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................

00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

04:30:17 p.m. #21 Text 0 File DVDR.cpp, Line 4893

Drive: HL-DT-ST DVDRAM GSA-4120B

Book Type request: DVD-ROM

Book Type setting not supported for the loaded disc type

04:30:40 p.m. #22 SCSI -1194 File Cdrdrv.cpp, Line 1430

SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04550000

Status: 0x04 (0x01, SCSI_ERR)

HA-Status 0x00 (0x00, OK)

TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x73

Sense Qual: 0x04

CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00

Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10

0x32 0x38 0x00 0x0C 0x73 0x04

04:30:40 p.m. #23 CDR -1194 File Writer.cpp, Line 311

PMA update failure

04:30:40 p.m. #24 Text 0 File ThreadedTransfer.cpp, Line 228

all writers idle, stopping conversion

04:30:40 p.m. #25 Text 0 File ThreadedTransfer.cpp, Line 222

conversion idle, stopping reader

04:30:40 p.m. #26 Text 0 File DVDR.cpp, Line 2632

EndDAO: Last written address was -1

04:30:40 p.m. #27 Text 0 File DVDR.cpp, Line 4893

Drive: HL-DT-ST DVDRAM GSA-4120B

Book Type request: DVD+R

Book Type setting not supported for the loaded disc type

04:30:40 p.m. #28 CDR -1194 File WriterStatus.cpp, Line 167

PMA update failure

04:30:40 p.m. #29 TRANSFER -24 File WriterStatus.cpp, Line 167

Could not perform end of Disc-at-once

04:30:40 p.m. #30 Phase 38 File dlgbrnst.cpp, Line 1832

Burn process failed at 4x (5.540 KB/s)

Existing drivers:

File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 12:37:14 p.m. (Prassi/Veritas driver for win 2K)

File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=79114 bytes, created 20/08/2001 12:00:00 a.m. (Adapter driver for rec)

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Edited by Charles
DarkRaptor Newbie

DarkRaptor

Posted
Posted
pura vida Darkraptor voy a probar, mae y esos drivers exactamente para ke sirven?

PD archylus voy a ignorar su comentario...  :P

53800[/snapback]

Esos controladores proveen los API's estandarizados para la comunicación entre dispositivos que utilicen puertos SCSI y ATAPI

Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...