Victor Posted October 30, 2009 Report Posted October 30, 2009 El asunto es q el ice me dio un modem adsl marca 3 patitos, yo tengo uno Zoom X6 q aunque no es la pomada canaria es mejor q el del ice y me da la opcion de red inalambrica, firewall, entre otras cosas., pero no logro configurarlo para q me conecte a internet. Creo q estoy poniendo mal los datos pero igual me declaro detras del palo, aqui les dejo algunos de mis datos: DATOS DEL IPCONFIG: *************************************************************************** C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : PHENOMII Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet Physical Address. . . . . . . . . : 00-24-8C-FB-29-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9db2:2968:4eea:5b45%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : jueves, 29 de octubre de 2009 08:34:15 p. m. Lease Expires . . . . . . . . . . : viernes, 30 de octubre de 2009 08:34:15 p .m. Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 234890380 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-43-48-C3-00-24-8C-FB-29-0E DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.{13DF84B2-A826-4BB2-A81C-AB6494249E51}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:3867:c4c:3640:fbe6(Prefe rred) Link-local IPv6 Address . . . . . : fe80::3867:c4c:3640:fbe6%13(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled ************************************************************************ DATOS de http://whatismyipaddress.com/ Your IP address is 201.191.4.25 ***************************************************************** Datos que aparecen en la configuracion actual del model del ICE: Board ID: ADSL2+ V 0.2 Software Version: DSL ROUTER V 1.0.16 Bootloader (CFE) Version: BCMCFE V 1.0.3 LAN MAC: 00:B0:6C:50:EA:93 WAN MAC: 00:B0:6C:50:EA:93 Running Time: 00:02:13 System Time: 2000-01-01 Sat 00:02:13 Running Status -- DSL Info This information reflects the current status of your DSL connection. Line Rate - Upstream (Kbps): 250 Line Rate - Downstream (Kbps): 512 LAN IP Address: 192.168.1.1 Default Gateway: 200.91.104.9 Primary DNS Server: 200.91.75.6 Secondary DNS Server: 200.91.75.5 The Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) are needed for setting up the ATM PVC. Do not change VPI and VCI numbers unless your ISP instructs you otherwise. VPI: [0-255] 8 VCI: [32-65535] 35 Choose Add, Edit, or Remove to configure WAN interfaces. Choose Save/Reboot to apply the changes and reboot the system. Port/VPI/VCI Con. ID Category Service Interface Protocol Igmp QoS State 0 /1 /50 1 U BR pppoe_1_50_1 ppp_0_1_50_1 PPPoE Disabled Disabled Enabled IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Enable UPnP Enable DHCP Server Start IP Address: 192.168.1.2 End IP Address: 192.168.1.254 Leased Time (hour): Running Status -- Route Flag: U - up, ! - reject, G - gateway, H - host, R - reinstate D - dynamic (redirect), M - modified (redirect). Destination Gateway Subnet Mask Flag Metric Service Interface 200.91.104.9 0.0.0.0 255.255.255.255 UH 0 pppoe_1_50_1 ppp_0_1_50_1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 br0 0.0.0.0 200.91.104.9 0.0.0.0 UG 0 pppoe_1_50_1 ppp_0_1_50_1 ***************************************************************************
Razz Posted October 30, 2009 Report Posted October 30, 2009 Que modelo es? Dejeme el modelo aca, y mañana en la tarde o en la mañana le ayudo con eso . Aunque ud puede pedir al ICE que se lo configuren.
Victor Posted October 30, 2009 Author Report Posted October 30, 2009 Es un Zoom X6 5590 http://www.zoom.com/products/adsl_overview.html Gracias de antemano por la ayuda
Guest Posted October 30, 2009 Report Posted October 30, 2009 Llame a alguien del ice para que lo configure.
kLorD Posted October 30, 2009 Report Posted October 30, 2009 mae en el foro hay una guía de darthcharlie para configurar(no es el x6 pero es la misma idea), yo tengo un x5 y lo configure con eso
Victor Posted October 30, 2009 Author Report Posted October 30, 2009 seria tan amable de facilitarme el link?
kLorD Posted October 30, 2009 Report Posted October 30, 2009 (edited) seria tan amable de facilitarme el link? LOL mae....... Edited October 30, 2009 by DrKrz
Hyde Posted October 30, 2009 Report Posted October 30, 2009 Mae un zoom , esos routers tienen el software mas sh!t que pueda existir, pero bueno aquí va. Lo primero que tiene que hacer es conectarse al router por web, para ello asegurese que su red esta en la misma red del router. Despues que se loguea, se va a la tab que dice advanced setup, y le da click en wan configuration, debería ver una pagina similar a esta según la version de sh!tware que el router suyo tenga. Ahora lo primero que configura es la encapsulacion hay muchas opciones para escoger según el tipo de conexión que el ISP use, el ICE usa IP over ATM tons esta seria la que tiene que escoger 1483 IP Routed LLC, aunque podría tener otro nombre . Después configura los valores para VPI Y VCI, como los saco del Router del ICE en ese caso 8 y 35 respectivamente. Donde dice IP Adress es la Direccion IP publica que el ICE le asigno a usted, en este Caso 201.191.4.25, donde dice subnet mask usa una mascara de 30 Bits, osea 255.255.255.252. Donde dice Use DHCP lo desabilita. Donde dice Gateway IP Address, tiene que poner la otra direccion IP de esa Subred, que seria la direccion IP de la interfaz del ICE, como usted no la puso yo se la facilito es 201.191.4.26 y habilita el default Route. Ya lo ultimo seria los DNS si los quiere poner puede usar estos 200.91.75.5, 208.133.206.44. Le da save settings, después salva toda la crap en la memoria flash del router con el boton que dice write settings to flash y pídale al de arriba que el Sh!tware le salve todo como lo puso. Adicionalmente le puede activar el firewall, nat, y si quiere otro pool de direcciones diferente para la red LAN también lo puede hacer. Espero que eso le sirva, suerte
Victor Posted October 30, 2009 Author Report Posted October 30, 2009 Pura vida Ahora llego e intento, gracias por la ayuda
Recommended Posts